1 / 3
TwoTrees Sk1 Set of centering and dust-protective sleeves for thrust bearings — image 1
1 / 3

TwoTrees Sk1 Set of centering and dust-protective sleeves for thrust bearings

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Reduce the load on the stepper motors in SK1 printer by using F8-16M thrust bearings.

Rating
5 / 5
Likes
13
Downloads
55
Makes
0
Views
399
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I decided to reduce the load on the stepper motors in my SK1 printer by using F8-16M thrust bearings (8x16x5 mm). To ensure proper installation, I added centering rings, allowing the bearings to stay perfectly aligned with the lead screws. Additionally, this setup provides protection against dust and filament debris entering the bearings.

Print Settings:

  • Material: ASA
  • Layer height: 0.2 mm
  • Nozzle: 0.4 mm

Note: My TwoTrees SK1 is well-calibrated, ensuring excellent dimensional accuracy with tight tolerances. Please consider this when printing.
 

Step 1: Printing All Components

Print the following parts before starting the assembly:

  • 2 x Mounting Sleeves for Front Bearings
  • 1 x Centering Ring Rear Z
  • 1 x Sleeve for TH Bearing Rear Z

Step 2: Front Z-Axis Bearings Assembly

  1. Press the bearings into the mounting sleeves and ensure they rotate freely.
  2. Unscrew the lower part of the lead screw coupler.
  3. Lift the coupler enough to insert the sleeve into the motor housing.
  4. Tighten the coupler securely.
  5. Repeat the process for the other front Z-axis.

Step 3: Rear Z-Axis Bearing Assembly

  1. Remove the rear lead screw coupler.
  2. Place the Centering Ring Rear Z onto the protruding body of the stepper motor.
  3. Gently position the Sleeve for TH Bearing Rear Z into the centering ring.
  4. Ensure the components fit snugly.

Step 4: Gluing Components (Optional)

To ensure a perfect fit and stability, I recommend gluing the centering ring and sleeve after seating them. While it’s possible to glue them beforehand, ensure a 0.5 mm gap between the ring and the sleeve's lower part. Tamiya Extra Thin Cement works perfectly with ASA and provides a strong bond.

Final Steps:

  1. Tighten all components securely.
  2. Level the print bed.
  3. Enjoy smoother and lighter operation of the stepper motors!

Tags