Stereo Phono Jack mount for sloped case--OpenSCAD file included
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is for mounting stereo RCA phono jacks inside a turntable that has a rear case that is sloped at 45 degrees.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 75
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
This allows dual RCA phono jacks to be mounted inside a case where the back panel is sloped at 45 degrees. I have a Revox B790 turntable that I am refurbishing and the phono cable was hardwired. This will allow me to disconnect the phono cable from the back of the unit instead of fishing the cable from inside my electronics cabinet. For the final part I plan to print in PETG and add a grounding post for the ground wire.
I may do a similar part for the power cord using a C8 panel mount jack.
I've included the OpenScad file in case you need to modify for a different application.
I printed this with PLA, 0.6mm nozzle, 0.3mm layers and flipped the object so the top (as pictured) is on the build plate. Finally, I added supports from the build plate only.