Angle grinder disc holder / držák kotoučů na flexu
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holder for all discs with 22mm central hole
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 332
- Makes
- 5
- Views
- 1,412
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This simple holder fits all standard angle grinder discs - no matter if its 115, 125 or 230mm - all have central hole of 22,3mm. Print with 3-4 perimeters and 20-30% infill, as some disc can be pretty heavy. Screw into some wood with countersing screw of 4-5mm diameter. Holder is slightly tilted, so discs can fall off.
Print as on picture - on side, no supports needed. Any filament will do - but I prefere PETG for all utility prints.
FreeCAD file added as well, in case someone needs to adjust something.
Jednoduchý držák na kotouče flexy - jedno zda 115 125 nebo 230mm - s centrální dírou 22,3mm. Doporučuji tisk se 3-4 perimetry a 20-30% výplní. Na materiálu nezáleží, ale preferuji PETG u většiny funkčních tisků. Tiskněte na boku jak je znázorněno - není potřeba žádných supportů. Držák je lehce nakloněn, takže kotouče nesklouznou.
Přiložen FreeCAD soubor, pokud si to někdo chce upravit.