Counting matching models…
Hi Folks! Thank you for your patience. It’s been quite a long journey developing the FlexATX version. I had to wait for another BC-250 board to arrive because my previous system suffered a brownout after I accidentally caused a short…
I have found at least three such flexagons, but they are either difficult to print or need some kind of reworking or gluing. So I made up my own version. All parts of my version are easy to print without support, and no cutting of…
To print this flexagon print 3 of the “Flexagon Regular” files along with 3 "Filament Hinge Link' files. You can also print the looser tolerance file if your printer is not very accurate. Print the Snap On Link at your own risk as I have…
The Fraks Flexarm is a tool-balancing arm designed to keep the attached tool parallel throughout its movement. It was created to hold soldering irons to install heat set inserts into 3D printed parts. It has a large working area for its…
⚠ The 1U mount is strong enough to hold the PSU, but it does wobble . For the 1U I recommend using the 10" panel version and remixing to fit anything you may need next to the PSU. FlexATX PSU rack mount for 1U (horizontal) or 2U…
This is a work in progress The project started as a concept for a single print unibody open chassis. As I met the limits of my Prusa MK3S, I realized it was not possible and broke down the design into parts. The enclosed design includes…
Man kann bei Flexaport eine 3D-gedruckte Halterung bestellen, aber die kostet sage und schreibe knapp 20 Euro. Dabei ist es ein Kinderspiel, die nachzukonstruieren. Das hat auch schon jemand getan, aber ich fand das Design eher… naja,…
This stops your printer from shitting everywhere and ruining your life. I used decently longer screws going into the back of the Bambu to support the weight of all the parts. The poop chute has at least 25mm of length and can take a…
Feel free to do whatever you like with this design. (:
This is a holder for the flexaport for camping toilets Simply stick it to the wall next to the toilet so you have it when you need it. There is an official one, but 20€ seemed like a very steep prize for something that easy. f3d files is…
Like FlexMesh , TriSphere is a geometric pattern I developed about a year ago to explore the boundaries of today's low-cost 3D printing technologies. I believe the origins of this pattern are from the Celtic tradition. I have every…
If all your exes live in Texas this may be the keychain for you! This is a Texas-sized flexible keychain to let ‘em all know where y'all from or where y'all going. Rep the Lone Star State anywhere and share your Texan pride with everyone!…
A simple magnetic holder for a CPAP hose. This is the companion piece to the magnetic CPAP mask holder, which can be found at https://www.printables.com/model/486099-a-magnetic-holder-for-a-cpap-mask The design uses two 25mm Neodymium…
Adapt a Flex* ** power supply for use with TFX. No nuts/inserts needed! Just use your 6/32. Require 6/32 x 1/4 countersunk screws for the PSU. Shorter ones may work, but engagement depth will be minimal. 3.5 in HDD mounting screw should…
Sluneční clona mechanicky pasuje, ale opticky jsem jí ještě netestoval. Takže používat na vlastní nebezpečí. ;-)
This keeps the dust out of your server. Full guide for PCBs and firmware is here: https://forums.servethehome.com/index.php?threads/10-and-40-gb-networking-on-the-cheap-5-10.30394/#post-281355 The card that this was designed for is…
A MiniITX PC case with support for FlexATX PSU and Single Slot GPU/NIC, etc.
After making the Fraks Flexarm i was looking for a place to make it usable for me. I didn’t want to bolt it down on my desk but had a perfectly usable wall. Print without support, the Fraks can be placed in it the same way as you do with…
Flexaret Film Spool for Flexaret VII, should be compatible with other Flexaret models aswell as other devices. Printed with supports.
The bracket was designed for mounting on a Flexa bed from Micasa, but can be mounted on any support that has a thickness of 22.5mm. The charging station from the Toniebox can be plugged directly into the holder. For easy removal of the…
Using this model you can mount a FlexATX PSU + mITX board + PCIe card on one 2u rack mount. The OpenSCAD file is attached in case you want to remix this or customize it in other ways. My build (aka parts that are tested with this build):…
Sluneční clona pro starý český fotoaprát Flexaret. Navrženo jako těsné k nasazení, Drží sama na kroužku čočky.
A simple cap to protect Meopta Flexaret VI lens. Drag attach, no threads. An eyelet is provided to tie the cap to the camera with a string. Best print with PETG. No support needed.
This is a front bracket that can be used to mount a FlexATX PSU at the front of a BeamCase SFF. This enables very short builds with 200mm beams, while maintaining full air cooler support. This bracket is only compatible with standard…
Exposure button for Flexaret VI Print Settings Printer Brand: Creality Printer: CR-10S5 Rafts: No Supports: Dont need Infill: 100 Filament: Spectrum Premium PLA black Notes: Use glossy filament, I had only matt available. Post-Printing…
10" rack shelf for disks and FlexATX PSU. Designed for 200mm deep rack When i replaced one of my 4U 19" rack mounted computer with a MS-01 i was looking around for 10" rack shelf to mount the disks and PSU on but i didn't find anything i…
I own a Meopta Flexaret Va camera. This camera takes push on filters. I just have a yellow one and a close up adapters. On my rangefinder camera, I use a Leica Thread Mount Voigtländer Color Skopar 35mm 2.5 lens that takes 39mm filters. I…
I recently purchased a hardware kit from KB3D.com for building the FRAKS Flexarm Heatset Insert Press. In addition to the hardware, several 3D printed parts are needed to complete the build. The designer of this elegant kit,…
Lens cap for a czech film camera - Meopta Flexaret VII.
Meeple Neon Sign for flexible led filament (flexament) Material: PLA Layer height: 0.2mm Inflill: 10% LED Flexament: https://www.led-tech.de/en/flexament
A simple lens shade for Meopta Flexaret VI cameras. Drag attach. Best print with PETG. No support needed.
I thought it might be interesting to have the same leveling and control behavior of the FRAKS arm combined with a rotary tool, so I made this mounting bracket for the F2 Pro. This operates the same as the other FRAKS mounts for soldering…
A simple cap to protect Meopta Flexaret III lens. Drag attach, no threads. An eyelet is provided to tie the cap to the camera with a string. Best print with PETG. No support needed.
For the drawers/boxes or the guest bed of the FLEXA White model by Sandic, there are fixations made of relatively soft plastic that tend to tear easily. This model can be 3D printed in PETG, providing a certain level of stability that…
A simple lens shade for Meopta Flexaret III cameras. Drag attach. Best print with PETG. No support needed.
KURABaldachin Flexa bett halterung für flexadoppelbett https://www.ikea.com/de/de/p/kura-baldachin-dinosaurier-20464211/
The original model by FunkyArt has the screws printed vertically which puts the layer lines parallel with the stressing forces of tightening them down, this increases the chance of the print failing or breaking along the layer lines. The…
Ersatzteil fuer ein FLEXA Bett Lattenrost. Ich habe in PETG gedruckt mit 2 Perimeter ohne Support
If you want/need to restore an ancient Meopta Flexaret VI, you will note that the old synthetic leather liners will need to be changed… If you have a fresh new set, you are lucky… When I restore my old Flexaret VI, I design an entire set…
# ⚠ IMPORTANT: Premium Design – Read Before Downloading! Please note that the full STL files and the complete building guide for this 8L 6-bay NAS case are not included in this free download . To support my work and get the complete,…
Nice nightlight based on flexament led wire. Material: transparent PLA, black Pla Layerheight: 0,2mm
Print upside down (with the circular side on the heated bed). Make sure that you have a good adhesion, or use a brim
A wall rack for holding Size 1 and Size 2 Tapping heads for Flexarm tapping arms. Also holds a chuck key for a drill chuck. Holds four size 1 and two size 2 heads. Wall mount with #12-#14 screws. Use wall anchors or attach to solid…
Eine erweiterung des FLEXA Kinderdoppelbett. Die leiter hab ich bestellt bei www.treppen-intercon.de (Anstellleiter / Hochbettleiter Intercon® Maxi 7 Stufen bis max. 160 cm / ohne (Standard) Artikel-Nr: 5000.MAXI-002) die restliche teile…
Awning Mesh Valance — 3D Printed Solution The fabric drop valance on my cassette awning got damaged, and replacing it with an original part wasn't really an option. So I came up with a simple but effective alternative using 3D printed…
A TPU cover for female SMA connectors that grips on, can be opened easily and doesn't get lost. Prints in <5min (minus printer warmup and leveling) Printed in 90A hardness Sunlu TPU with 0.3mm layer height and 0.4mm nozzle on a textured…
This 3D model set includes a custom FlexATX PSU adapter and an additional reinforcement bracket designed for the Cooler Master MasterCase H100 PC case. The adapter provides mounting points for the FSP FSP220-60LE power supply (not tested…
This Pin or Cap securely attaches the Flexa Bed Nightstand to the bed, ensuring a strong and stable connection. It's difficult for children to remove, enhancing stability. There are two versions tailored to different Nightstand designs:…
This is a quick change mount for a Yihua soldering station using their 9071 soldering iron. No magnets or screws, the mount locks on using a mechanical feature. Original Fraks Flexarm project here…
I do not like gridfinity (gasp) and have no need for it on this awesome press arm. I redesigned the tray to just be a tray with smooth bottom edges to help get things out of it.
Due to the specific design of the holder—featuring side arms—a other solution than wall mounting was required. Consequently, I designed this shelf-mounted version; slipping out is impossible, as the toilet itself acts as a stopper for the…
I am making a full opengrid wall and wanted to mount a flexarm to that. This HAS to be mounted to a full grid plate rather than a lite one in order to be able to hold up to the forces put on it. Printed in PETG no supports required. 6…
Magnetic feeder for flexarium or terrarium for chamelon or other repltiles
If you want/need to restore an ancient Meopta Flexaret VI, you will note that the old synthetic leather liners will need to be changed… If you have a fresh new set, you are lucky… When I restore my old Flexaret VI, I design an entire set…
I thought it might be interesting to have the same leveling and control behavior of the FRAKS arm combined with a rotary tool, so I made this mounting bracket for the F2 Pro. This operates the same as the other FRAKS mounts for soldering…
Using this model you can mount a FlexATX PSU + mITX board + PCIe card on one 2u rack mount. The OpenSCAD file is attached in case you want to remix this or customize it in other ways. My build (aka parts that are tested with this build):…
I do not like gridfinity (gasp) and have no need for it on this awesome press arm. I redesigned the tray to just be a tray with smooth bottom edges to help get things out of it.
Guide rail for the bed drawer of a Flexa bed. This 3D-printed model is a specially designed replacement part for the drawer guide of a Flexa children's bed. It ensures that the drawers glide smoothly and stably. The model is precisely…
Hi I present to you a Flexagon, an origami inspired fidget toy that moves “forever” - it spins inwards and outwards without limits It's made out of 6 identical pieces - you snap them together Print settings: 2 walls 10 % infill use tree…
Krytka pro FLEXARET VI a FLEXARET VII Filament: Aurapol PET-G graphite black & Filament PM PET-G orange 2018 Resolution: 0.20 mm
Thanks to scottychop and VengefulTwinky for their efforts! The completed Flexagon operated smoothly! I used Fusion 360 to repair and separate out one of the six filament connectors from the "Flexagon Fidget" by scottychop at…
It's a simple hook that fits the curvature of the horiz. beams of the beds exactly. Not made for extremely heavy things.
A hexahexaflexagon is a six-sided hexaflexagon. I haven't seen a hexahexaflexagon print yet, but there have been several trihexaflexagon prints. The pictures are of the 40mm version. I made the 80mm version after that, I suspect it flexes…
Anyone reading this who somehow hasn't already watched Vihart's classic hexaflexagon videos should stop reading now and go watch them. Anyway, I just watched them again for the first time since getting a 3D printer and, well, I did what…
I designed these bracket to fixate the now in my office unused holder for the school bag at the bottom side of the desktop plate. Here it can be stored for possible re-use in future. You may use 4 brackets for a strong fixture. For each…
I printed in ABS with 100% infill. Don't use PETG as it makes awfull squeeking noises if someone moves in the bed… (guess how I found out… :D ) After 6 months of use no degradation (ABS). You need support
