BeamCase SFF - front FlexATX mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a front bracket that can be used to mount a FlexATX PSU at the front of a BeamCase SFF.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 37
- Makes
- 0
- Views
- 1,224
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
This is a front bracket that can be used to mount a FlexATX PSU at the front of a BeamCase SFF. This enables very short builds with 200mm beams, while maintaining full air cooler support.
This bracket is only compatible with standard Flex-ATX PSUs with a length of 150mm, modular units, that are longer will not fit.
Required Hardware
M3x16mm countersunk screws
M3x20mm countersunk screws (optional but can be beneficial for front case panels)
1x 6-32 unc screw at least 20mm long
2x 6-32 unc screw approximately 9mm long
4x Voron style heat inserts (M3x5x4)
Requires a very compact downwards pointing PSU extension. I used this specific one and it just barely fits.