BeamCase SFF - front FlexATX mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a front bracket that can be used to mount a FlexATX PSU at the front of a BeamCase SFF.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 1224
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a front bracket that can be used to mount a FlexATX PSU at the front of a BeamCase SFF. This enables very short builds with 200mm beams, while maintaining full air cooler support.
This bracket is only compatible with standard Flex-ATX PSUs with a length of 150mm, modular units, that are longer will not fit.
Required Hardware
M3x16mm countersunk screws
M3x20mm countersunk screws (optional but can be beneficial for front case panels)
1x 6-32 unc screw at least 20mm long
2x 6-32 unc screw approximately 9mm long
4x Voron style heat inserts (M3x5x4)
Requires a very compact downwards pointing PSU extension. I used this specific one and it just barely fits.