NOCTURNAL - Use the Stars to tell the Time [improved version]-Northern Hemisphere
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The NOCTURNAL will determine your local time based on the position of stars in the night sky relative to Polaris.
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 93
- Makes
- 2
- Views
- 591
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an improved version of the original design at: NOCTURNAL - Use the Stars to tell the Time [original design] by 3DMason | Download free STL model | Printables.com
NOTE: This is for use in the Northern Hemisphere only.
The Nocturnal, sometimes also referred to as a horologium nocturnum (time instrument for night), or nocturlabe (French), is related to the astrolabe and sundial. It is a universal device that indicates local mean time from the position of the stars during different times of the year. Here's a picture of one dating back to 1781, which was used by sailors:

Most Nocturnals consist of the following main parts:
an outer disc marked with the months of the year, with subdivisions for days;
an inner disc marked with hours and quarter hours (on the larger instruments);
tooth or tab for one or more reference stars;
a pointer rotating on the same axis as the discs & sometimes extended beyond the rim;
an axis, or pivot point, with a hollow center such that Polaris can be sighted through it.
Design Details
The original design was based on a card stock template, which was downloaded from The Sundial Primer - The Nocturnal and measured 130x103x13mm. Unfortunately, the template graphics were not great. This updated version was completely redone to provide better readability of the discs, including the addition of a How-to-Use guide placed at the back of the outer disc, not to mention it is 3D-printable.
A great thank you goes out to the originator Carl Sabanski. Check out his cool sundial website: https://www.mysundial.ca/tsp/tsp_index.htm
The hour disc consists of three teeth that are used to reference one of three different stars, all of which are located near the North Star, Polaris. They are:
BD - "Big Dipper", or "Ursa Major," and references to the Pointer stars Dubhe & Merak;
LD - “Little Dipper” or "Ursa Minor" and references to the star Kochab;
CA - "Cassiopeia" and references to the star Schedar.
The figure below shows these three constellations with their respective reference stars in relation to Polaris:

Build & Construction Details
It is a simple construction/assembly of only 3 parts with no additional hardware required. Also, no glue is needed. All pieces fit over top of each other, with the pointer snapping into the center holes of both inner & outer discs. The outer disc is the larger piece with the handle at the bottom.
NO SUPPORTS ARE REQUIRED. Consider printing with glow-in-the-dark PLA filament to make the markings easier to see at night. Preferably red so as not to affect your night vision.
How to Use
First, decide which of the 3 reference stars is the most visible in the night sky;
Align the flat edge of your inner (hour) disc tooth of your chosen reference star, i.e., BD, LD or CA, with the current month & date located on the larger (month) disc. Note that the tick marks indicate a span of 5 days;
Hold the instrument in a vertical position away from you with the handle pointing down towards the ground;
Sight the North Star (Polaris) through the hole at the center of the instrument;
Rotate the pointer until its indicating edge points to the chosen reference star;
Read the indicated local mean time from the inner hour disc at the edge of the pointer;
To obtain standard time, longitude correction needs to be applied to the reading, including daylight saving time if applicable.
An Example using the Big Dipper

❶: The Big Dipper (BD) tab is selected & rotated to the present day on the calendar disc - in this example, March 7. ❷: With the nocturnal handle held vertically & pointing downwards, Polaris is aligned by eye through the central aperture located at the arm pivot (red dashed arrow). ❸: The sighting arm is rotated so that its longer edge is pointing & aligned to the reference star (Dubhe), located in the Big Dipper (green dashed arrow). ❹: The time is then read from the arm intersection with the hour dial - in this example, it reads 7:16 PM. Longitude and daylight savings corrections are then applied to read the correct standard time.
Accuracy
The final time reading accuracy depends on a number of factors. The main ones are the resolution of the dial graduations and the observer’s pointer alignment accuracy.
Historical nocturnals have been reported to indicate local time to within 15 minutes under favorable observing conditions. A simple error analysis of the design, considering the precision of the hour graduations, stellar alignment and calendar setting, suggests that a comparable accuracy of approximately ±15 minutes is also achievable with this design. This number, however, has not been confirmed through any extensive observations throughout a complete calendar year.
Worth noting also, the instrument illustrates a point sometimes overlooked in comparisons with sundials: the nocturnal’s date adjustment is primarily a sidereal-to-solar correction, not a separate equation-of-time correction, and its reading, therefore, can only approximate local mean time.
If you think this is a cool design, please hit the like button. I hope you enjoy building this & thanks for your support!