Case for DPS5005 USB C Adjustable Power Supply
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case for safe transport of the DPS5005 USB C Adjustable Power Supply
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 25
- Makes
- 0
- Views
- 284
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
A case for the DPS5005 USB C Adjustable Power Supply to safely carry it around in your backpack or similar.
Print in medium to hard TPU (I used 95A) so the case is slightly flexible but still robust and provides impact protection.
The fit of the PSU in the case so that it doesn't fall out by itself but can easily be pulled out with two fingers needs to be tuned carefully. I provided two STL files with a tight and loose tolerance. You can also use the original FreeCad file and adjust the “tolerance” setting in the “Parameters” spreadsheet to tune it precisely to your printer.
If it is slightly too loose and you don't want to reprint, gluing a small strip of thin foam tape to one side of the inside can help to keep the PSU in place.