1 / 5
IKEA EKET leg extenders
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A print to extend the Ikea Eket legs by two centimeters. https://www.ikea.com/de/de/p/eket-bein-holz-80474151/#content
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 22
- Makes
- 1
- Views
- 160
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution
Our robot vacuum kept bumping into our IKEA cabinet because it was too high for the Lidar to see and too low to drive under.
That's why we decided to raise the cabinet two centimeters.
the adjusting screw has to be removed from the leg and then the prints can be installed under the legs.
The print should fit snugly so that it doesn't fall away when installing under the furniture. If it doesn't fit completely, a drop of glue can be used.
Printed in PLA with 25% Infill