1 / 3
Desk stand replacment for a lamp
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed as a replacement for a stand that bolts to the side of your desk.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 20
- Makes
- 0
- Views
- 82
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
It can hold a lamp, microphone, and everything else that has a mounting “clamp” to the desk and has a rod that slots into the mount. Ideally should be printed in PETG, although if your lamp is light, PLA could work too. For PLA I recommend an increased infill (30 % or more, depending on filament, 50% should be more than enough)
Printing instructions:
- PLA, or any other material (PLA works very well for me),
- No supports,
- Infill on the higher side (My: 30% gyroid),
- Brim not required but recommended,
If you have questions, ask in the comments. If this model suits your needs remember to like. I would also very appreciate if you upload a make.