Video PROJECTOR Support for IKEA MOSSLANDA
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A custom Ikea Mosslanda support for video projectors, designed to be adjustable, durable, and screw-free.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 19
- Makes
- 0
- Views
- 259
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I created this Ikea Mosslanda support for an old video projector I had lying around. The piece slides smoothly from any side of the shelf to the desired position and stays in place when the projector is placed on top.
In my case, I printed two pieces in PETG (for added strength), with a 0.28mm layer height and 30% gyroid infill. You can also print it in PLA, but I chose PETG in case the projector releases heat. I’ve tested it with a couple of different projectors, and it works great—even when I tilted the projector, it held up without any issues.
There are two versions of the model available (both 10mm tall): one with bezels and one without, allowing you to adjust the Z height in your slicer and customize it to be taller or shorter.