79 models
Snap-on Hook. 8mm wide, 3mm thick. Tested with PETG 0.3mm, 100% infill. I've built a Lack Tower for my Prusa i3 MK3S+, and found out Mosslanda Picture Ledge has 55cm width which is identical to Lack Table, so I screwed the ledge on the…
Simple miniature picture shelf. Print layer height: 0,15 infill: 15 % orientation: normal supports: none
I designed a mosslanda end cap to prevent things from falling of. The cap itself is snug fit so its pretty tight. The best way to assemble it is from the top. Printed in 0.2 res and with white PETG.
Printed on the Prusa Mini with E3d Revo 0.8 nozzle and 0.4 layers. Used 3 perimeters for extra strength.
Headphone holder with a custom hook for the Ikea Mosslanda shelf. The shelf lip is ~12.7mm (~½ Inches), to fit snuggly, I designed the clip to be 12.65mm. There are multiple variants for different headphones sizes: Very large: fits…
Kleine Erhöhung für Dekoration im Ikea Mosslanda Regal. Habe für den Druck die Oberen und unteren schickten entfernt und den Infill auf 10% runtergesetzt. Ebenfalls kann der Druck beliebig in die Höhe skaliert werden. Small increase for…
Organizing your paint tubes can help you keep your workspace tidy and make it easier to find the color you need. Use a rack or holder can help keep your tubes organized and prevent them from tipping over. I needed mine to fit on a Ikea…
Simple hook to hang small things and clip to hang paper-cards at the IKEA Mooslanda pictura bar.
A little catch-all that will fit perfectly in a Mosslanda shelf from IKEA. You can customize the box by adding text in the slicer.
A non-destructive mount for IKEA Mosslanda planks on acoustic wall panels. Can be printed without supports. M3 nut and screw needed. Screws not visible when mounted. Make sure to not use too long screws, otherwise the panels will be…
A quick remix of the clip and hook to be fit more snuggly with the shelf.
I found Ken's model, but unfortunately it was rather limited in its uses as it would only work for coffee. After grueling effort on my part, I managed to modify the design to be a multi-beverage, multi-function platform. Plants ✔ Water ✔…
Useful side for Mosslanda shelf that I wall-mounted in my kitchen to keep my spices. you'll need to drill two holes of 3mm. Left and Right sides are available and also the template to drill a perfect hole in the right position. Print…
With the help of this 3D-printed part, it is possible to mount the picture rail IKEA MOSSLANDA under the table, kitchen cabinets or directly on the ceiling. For the assembly you need 2 parts (once the file under the downloads and once…
Beim Kürzen des Regals reißen oft die Schnittkanten aus. Diese Abdeckung verhindert den Blick auf die Kante und kann ganz leicht angeeklebt werden.
I used four shelves to keep all my spices on hand. :) I've uploaded the second notchless version as I found the notch version problematic to fit in with some of my shelves.
I made a simple set of hooks that slip onto my IKEA shelf. Feel free to modify to fit other spaces This is my first model for 3D print so it may not be perfect but worked well for me. Needs supports for the hooks.
Here I present you a hook for the MOSSLANDA picture rail from IKEA. Hier präsentiere ich euch einen Haken für die Bilderleiste MOSSLANDA von IKEA.
I had to cut my IKEA Mosslanda to a smaller size to make it fit, but I didn't like seeing the wood. So I quickly designed a side cover. Material: PLA (any material/color will work) Layer height: 0.2mm will work best, since the model is…
I wanted a simple phonemount for the IKEA Mosslanda picture shelf that i use as a nightstand, so i made this. you can scale the Z-axsis for different witdt of the mount. 300% scale for “one piece” phone mount, or as pictured, two 100% and…
A paper towel roll holder that attaches to an Ikea Mosslanda shelf. Mirror it in your slicer to print the second part. For rolls of an inner diameter greater than 40mm and up to 55mm roll thickness.
Designed for Gamecube controllers, but works with many as they slide along the shelf to fit the controller curves. There's a wire blocker on top to reduce stress on the controller side. For IKEA MOSSLANDA shelves. Print flat, no support…
It will fit all perfume tester with a diameter smaller than 11 mm. Its a left and right site to connect to each other so they'll stay together. Printed with PLA in 0.2mm LH. 15% Gyroid infill
Customizable shelf insert to put Nintendo Switch game boxes onto an IKEA Mosslanda shelf. Set either the maximum length of the shelf insert (e.g. based on your print bed size) and let the scad file calculate the number of game box places…
Sponge holder for the Ikea Sunnersta clamp rail system or similar systems with 16mm tubing. The labeling was added with a slicer before printing (Prusa Slicer). It can also be used as a cell phone holder. Schwammhalter für das Ikea…
Lets you wrap around an inside corner with IKEA Mosslanda shelves. I bought this style of shelf to store and display my guitar pedals and wanted to use a corner to do so I made this to create L-shaped Mosslanda shelving! The main drawback…
Ikea Mosslanda Plattform mit Ränder und einmal ohne.
Je voulais poser des étagères MOSSLANDA de chez IKEA. Problème, je voulais les disposer de part et d'autre d'un angle... J'ai donc fabriqué de quoi faire le lien d'angle entre deux étagères MOSSLANDA.
No need support with lateral position. 30cm in width and 30cm at the base of the hook. Accept several kilos with only 15% feeling. I haven't test the weight limit.
small quick holder for wooden katana (shelf Mosslanda) in case the print is slipping, it is possible to stick on a non-slip strip
Just a quick design to organize my atomizers. Designed to fit all sizes - my biggest atomizer is 41mm in diameter and still has some space. Print instructions Category: Organization Summary Just a quick design to organize my atomizers.…
It is a simple and small hook for ikea mosslanda, just print it and use it!
Spool Holder with 608 bearing wheels which sliders onto IKEA Mosslanda picture ledge. Parts Required: 8 x M3 16mm bolts 4 x 608 Bearings 0.20mm layer hight with 20% infill.
IKEA Mosslanda 0.5 to 2 cm height compensation 9.9 cm long and wide for better fit.
Helps supporting your shelf on walls/ tiles if you dont want to drill
Print on the side. Category: Organization
It's for the shorter version of the Mosslanda picture ledge (55cm) with a depth of 96cm. I found other models that didn't fit into those dimensions. I don't know if IKEA changed the ledge over time but the ones I have all have these…
I made this box to clean up the mess all the small LED remotes produce. It is designed to fit nicely into an IKEA Mosslanda shelf.
A filament roll holder for the Mosslanda shelf from IKEA. The holder is simply inserted from the side. It can be screwed tight or stabilized by means of a connector.
I used five long versions and one “end”-version to cover the whole width of the IKEA Mosslanda. The test tubes I used are 16 mm in diameter. I think it came out great and there's plenty of space for some Blackwing Volumes to come.
Entworfen habe ich diese Halterung, um das Regal an ein Ikea Hochbett anzuhängen. Gedruckt mit: Material: PLA+ weiß von Elegoo Drucker: Neptune 4 Plus, 0,4er Nozzle Druckeinstellungen: 15% Infill; Gyroid, Schichthöhe 0,2mm, Anordnung…
This is a hook for the Ikea Mosslanda shelf, as well as a divider with a hook for the shelf. The divider is for light weight purposes as it won't hold much weight (it will slide around). I used the hooks for gloves and masks. No supports…
This GBA game cartridge holder, can print a holder for three cartridges on a Prusa Mini+. You can use the scad file to change the number of pockets via the ‘numberOfPockets = 3;’ line. Please print with the bottom up. No support is…
Cardholder, thats fits into IKEA MOSSLANDA, stores 18 standard creditcard-sized cards.
A Hexagonal headphone holder for your mosslanda IKEA "shelf"
I created this Ikea Mosslanda support for an old video projector I had lying around. The piece slides smoothly from any side of the shelf to the desired position and stays in place when the projector is placed on top. In my case, I…
These are end caps for Ikea MOSSLANDA picture shelves . I need more storage for my tiny kitchen, and I need storage bigger than the typical spice rack but not for things that are big like pots. I have many creative locations on walls, but…
I was on the look for a clean storage for the many pixi books of my childs. This solution keeps them in reach is easy to put them in and out even for the kids and it can be sorted if it wanted. It also looks very good. I have created the…
Simple power bar and cables holder that can be mounted under the table from a cheap IKEA MOSSLANDA. I did cable management the lazy way by wrapping the cables around the L-brackets. Hardware needed: M6 screws (4 pcs.) Wood Threaded…
This allows you to use your iPhone for top down shots by mounting it to a IKEA MOSSLANDA shelf.
A mount to add a shelf to your ikea Malm bedframe securely and without a need to damage the bed
Hier habe ich einen Blumentopf für die IKEA Bilderleiste Mosslanda das sich genau einpasst. Somit kein Überstehen und rutschen. Ich habe sie angepasst für einen Blumentopf von 9cm Durchmesser und 8cm tiefe (zum Beispiel für IKEA FEJKA)
hang some ormanents from the front of your Ikea MOSSLANDA picture ledge.
This is a simple extension for the IKEA Mosslanda shelf to hold a plant pot that is larger than the shelf. It is very strong, but I wouldn't overdo it. At your own risk ;-) It extends your available depth from ~100mm to ~155mm
Plattform für Mosslanda mit zwei Haken. Druck bitte mit Support. Platform for Mosslanda with two hooks. Please print with support.
We placed a mobile onto the IKEA Mosslanda shelf which is mounted above our changing table. The mobile provides a lot fun and smile for our baby while we are changing the diapers. But because the rim of the shelf is so small the mobile…
MOSSLANDA shelving for car display. Small parts, which are used as wedges for collection cars. Wedge to make a stop and ensure that the car is in a good position.
A simple adapter to hang the original Anycubic kobra 2 Pro spool holder on the IKEA MOSSLANDA shelf
I use the picture rail as a floating shelf next to the couch. You can't see the underside and I made an angle so that the picture bar can be mounted more stably on the wall. The shelf is approximately 10 mm thick. In addition, the screws…
Výztuha poličky ikea už se mě stalo že se rozlepila tak projistotu jsem vyrobil výztuhu pro více zatěžované poličky 2 verze jedna pod a druha je opačně vždy je potřeba tisknout normální díl a pak jeden ozrcadlený zrcadlil jsem přímo ve…
With my tea living on a IKEA Mosslanda picture ledge/shelf, I needed an adapter for the stackable Tea Bag Dispenser by pwnate. This adapter places the dispenser in the middle of the Mosslanda shelf width, and sets the bottom dispenser…
We charge all our devices in the living room next to the couch, but the constant mess of tangled USB cables, and the search for the right one, quickly became frustrating. These cable outlets are our simple and clean solution. By drilling…
A practical multifunctional hook that can be attached to a Mosslanda wall shelf. Objects can be hung up at the front with a loop (e.g. kitchen cloths) and items can be hung up at the bottom by gently pushing them in, similar to a…
Handyhalter zum Einhängen in Sunnersta oder Mosslanda. Kann auch als normaler Halter zum Hinstellen verwandt werden. Category: Household
a simple adjustment of the monster mouth headphone holder to the old Ikea picture board mosslanda. now it's a great addition to the wardrobe. v.2.0 - in the second version 1mm has been added to the hanger Print Settings Printer Brand:…
its a mount for a litte rc aircraft to be hung on ikea mosslanda shelfits a mount for a litte rc aircraft to be hung on ikea mosslanda shelf
A mount for the Timmerflotte sensor on the Mosslanda picture ledge.
I wanted to attach our video baby monitor to an existing IKEA Mosslanda picture ledge. So I created this holder, which positions the camera at a 45° angle. Our monitor's model number is BL9046. I originally wanted to include a…
This is an elegant end cap for the IKEA Mosslanda picture ledge. I use them as spice racks and I don't want the spice shakers to roll off the edge. The end cap fully hides the edge so it can be used with original or cut shelves alike.…
The fit and angle are enough that it doesn't shift much with standard blurays. But I do have a couple indents on the bottom if you want to add some 2mm nanotape to make sure it doesn't shift at all. Print without supports
Nothing special, just printed 0.2 standard for 0.4mm nozzle in esun matte pla white
I created this Ikea Mosslanda support for an old video projector I had lying around. The piece slides smoothly from any side of the shelf to the desired position and stays in place when the projector is placed on top. In my case, I…
Here I present you a hook for the MOSSLANDA picture rail from IKEA. Hier präsentiere ich euch einen Haken für die Bilderleiste MOSSLANDA von IKEA.
