IKEA MACKAPÄR Shoe Rack Leg Spacer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extend the shelf height of this rack by 25mm.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 83
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
The IKEA MACKAPÄR shoe rack has two shelves, one larger (20cm) and one smaller (11cm). The smaller one annoyingly is just a touch too small for many shoes. This spacer raises it by 25mm by extending the legs.
The spacer alone isn't enough, you also need to replace the M8-1.25 fastener hardware that connects the legs. If you extend a bottom shelf, you need a longer threaded rod (about 60mm). If you extend the top shelf, you need a longer carriage bolt (about 45mm). I needed both as shown in the photos. Multiple units of this rack can be stacked, so you might need multiple sets of hardware.
I also used some 5/16" USS washers to reduce/distribute the pressure that the thin rim of the leg tube puts on the printed part.