IKEA MACKAPÄR Shoe Rack Leg Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extend the shelf height of this rack by 25mm.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
The IKEA MACKAPÄR shoe rack has two shelves, one larger (20cm) and one smaller (11cm). The smaller one annoyingly is just a touch too small for many shoes. This spacer raises it by 25mm by extending the legs.
The spacer alone isn't enough, you also need to replace the M8-1.25 fastener hardware that connects the legs. If you extend a bottom shelf, you need a longer threaded rod (about 60mm). If you extend the top shelf, you need a longer carriage bolt (about 45mm). I needed both as shown in the photos. Multiple units of this rack can be stacked, so you might need multiple sets of hardware.
I also used some 5/16" USS washers to reduce/distribute the pressure that the thin rim of the leg tube puts on the printed part.