1 / 10
ZOHD Altus Nose cone and DJI 03 Air VTX mount with cooling fan — image 1
1 / 10

ZOHD Altus Nose cone and DJI 03 Air VTX mount with cooling fan

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

ZOHD Altus Nose cone and DJI 03 Air camera and VTX mount with cooling fan

Rating
0 / 5
Likes
7
Downloads
90
Makes
1
Views
511
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

ZOHD Altus nosecone Adapted from Hybridkunst to precision fit DJI Air 03 system. (Model4_Final.stl)
DJI 03 Air mount the fan for ZOHD_lid.stl - (Tap M3 threads for 30 x 30 x 10 5vdc fan into lid, use M3 * 14mm screws to mount Fan to lid)
DJI 03 Air mount with fan for ZOHD_base.stl - (Tap M3 threads for lid mount and use 4  M3   8mm screws to mount lid on base. Force thread M1 * 4/5mm screw threads for base mount to nose cone. mount assembled base in nosecone)
Nose cone: Craft Grey Primer was used with two coats sanded with 1000grit in between coats, then a coat of satin black paint to finish gives a nice match to the existing black EPP foam used on this aircraft.
Mount: No painting or finishing was used.
I have included step files for mounts, however as I used boolean difference in blender to fit the DJI 03 air camera I only have mesh files for the nose cone and no step files.

Tags