1 / 10
ZOHD Altus Nose cone and DJI 03 Air VTX mount with cooling fan — zdjęcie 1
1 / 10

ZOHD Altus Nose cone and DJI 03 Air VTX mount with cooling fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

ZOHD Altus Nose cone and DJI 03 Air camera and VTX mount with cooling fan

Ocena
0 / 5
Polubienia
7
Pobrania
90
Wydruki
1
Wyświetlenia
509
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

ZOHD Altus nosecone Adapted from Hybridkunst to precision fit DJI Air 03 system. (Model4_Final.stl)
DJI 03 Air mount the fan for ZOHD_lid.stl - (Tap M3 threads for 30 x 30 x 10 5vdc fan into lid, use M3 * 14mm screws to mount Fan to lid)
DJI 03 Air mount with fan for ZOHD_base.stl - (Tap M3 threads for lid mount and use 4  M3   8mm screws to mount lid on base. Force thread M1 * 4/5mm screw threads for base mount to nose cone. mount assembled base in nosecone)
Nose cone: Craft Grey Primer was used with two coats sanded with 1000grit in between coats, then a coat of satin black paint to finish gives a nice match to the existing black EPP foam used on this aircraft.
Mount: No painting or finishing was used.
I have included step files for mounts, however as I used boolean difference in blender to fit the DJI 03 air camera I only have mesh files for the nose cone and no step files.

Tagi