P
Printables
ZOHD Altus Control Horn (Remix)
Simple print using PLA. Bed temp 60 C., Nozzle temp set at 200 C. for the filament I was using.
Wyniki wyszukiwania: altus
Liczymy pasujące modele…
P
Printables
ZOHD Altus wall mount
An effective solution for mounting the model on a wall to protect it from damage from constant folding and unfolding. The thick walls perfectly support the load, even with the battery charged. I printed with PETG, but PLA should also do…
P
Printables
Altus VTOL conversion kit
Required additional components: 2× DS-S007M 21g servo (or similar, dimensions shown in the image) 2× 623zz bearings 10× M3 × 20 mm screws 12× M1.7 × 4 mm screws (similar-sized self-tapping screws can be used) 2× M3 × 6 mm screws 8× M3…
P
Printables
Zohd Altus Wing Bay Filler
This is a simple model of the interior of the extra electronics bay in both wings of the Zohd Altus twin engine foam RC aircraft. Insert and affix with tape to make the wings more streamlined. The original FreeCAD model is included.
P
Printables
ZOHD Altus Nose cone and DJI 03 Air VTX mount with cooling fan
ZOHD Altus nosecone Adapted from Hybridkunst to precision fit DJI Air 03 system. (Model4_Final.stl) DJI 03 Air mount the fan for ZOHD_lid.stl - (Tap M3 threads for 30 x 30 x 10 5vdc fan into lid, use M3 * 14mm screws to mount Fan to lid)…
P
Printables
ZOHD Altus DJI 03 Air Unit Nosecone Mount
Assembly instructions: Tap M3 threads into holes into fan mount holes on lid or use self-tapping screws M3 * 14mm to secure 30 x 30 x 10 5Vdc fan to lid. Secure FAN to lid. Tap M3 threads into receiver holes on base for the lid or use…
P
Printables
Altus Logo name speakers
Hello, I present you Altus Logo for Altus Speakers Hope you'll like it
P
Printables
ZOHD Altus Vtail horn
this servo horn adapter works with most servo horns, making it possible to use any type of 9g servo in Vtail of Altus
P
Printables
Altus Nose for DJI FPV air_unit / Vista
deleted the upper hole, added 2 holes 90deg apart created a mount for the air unit - use a ziptie to secure the unit to
P
Printables
Shimano Altus Cantileverbremse Federgehäuse/Shimano Altus cantilever brake spring housing
Beim Erneuern der Bremsbeläge ist mir das Federgehäuse der Shimano Altus Cantilever Bremse zerbrochen. Kein Wunder, die Bremse ist schon über 30 Jahre alt. Deshalb gab es im örtlichen Handel auch kein Ersatzteil mehr dafür. Da das Rad…
P
Printables
Altus zohd o4 pro nose
added screws for main unit and slot for sd card, some re-positioning of the camera, all credits to the author of the oryginal design - thank you for sharing f3d! Category: Hobby
P
Printables
FPV Upgrade for ZOHD Altus – Magnetic Nose for Walksnail Moonlight
ZOHD Altus – Magnetic Nose for Walksnail Moonlight This 3D-printed nose is designed specifically for the ZOHD Altus FPV aircraft. It provides a dedicated mount for the Walksnail Moonlight unit (camera + VTX) and attaches magnetically to…
P
Printables
ZOHD Altus Control Horn (Remix)
Simple print using PLA. Bed temp 60 C., Nozzle temp set at 200 C. for the filament I was using.
P
Printables
ZOHD Altus wall mount
An effective solution for mounting the model on a wall to protect it from damage from constant folding and unfolding. The thick walls perfectly support the load, even with the battery charged. I printed with PETG, but PLA should also do…
P
Printables
Altus VTOL conversion kit
Required additional components: 2× DS-S007M 21g servo (or similar, dimensions shown in the image) 2× 623zz bearings 10× M3 × 20 mm screws 12× M1.7 × 4 mm screws (similar-sized self-tapping screws can be used) 2× M3 × 6 mm screws 8× M3…
P
Printables
ZOHD Altus Walksnail Avatar GT2 nose cone
ZOHD ALTUS nose cone adapted for the Walksnail Avatar GT2. I have added a cut-out for easier access to the SD card. The camera has a small amount of tilt adjustment, and I have also added locking screws for the antennas, allowing their…
P
Printables
Thumb shifters compaitible with Shimano Altus
This is a thumb shifter compatible with Shimano branded mountain bike shifters. The file included is for the right shifter, if you need a left replacement shifter mirror the file. Due to this part replacing injection molded rubber, this…
P
Printables
Spring Cup for Shimano Altus Cantilever Brake
Keep your old bike working! I designed these to repair my 1990s mountain bike brakes. In my case, on spring shroud was missing and the other was broken so I reverse engineered the original part to come up with this. To print 2 of these…
P
Printables
Avionics Sled For 3+in Diameter Rockets Altus Metrum EasyMini x2
Avionics sled that will fit in 3+ inch airframe tubes. Rotary switch - https://www.digikey.com/en/products/detail/schurter-inc/0033-4501/641120?s=N4IgTCBcDaIMoGMAWBXATgFwKZoAQAZ8BmIgOgBYBWfARhAF0BfIA Altus Metrum EasyMini x2-…
P
Printables
Shimano Altus oversize 13t tensioner pulley
made this to tension my chain more and increase the derailleur capacity a little bit since I'm gonna install a larger cassette been riding for months and it works fine. printed in petg make sure to have good supports underneath and enable…
P
Printables
Avionics Sled For 38+mm Diameter Rockets Altus Metrum EasyMini x2
Avionics sled that will fit in 38+mm airframe tubes. Included adapter is needed for 3+ inch diameter rockets. Rotary switch -…
P
Printables
Shimano Altus Shifter Dust Cap Screw
Shimano Altus Shifter Dust Cap Screw (tested and works) Two version: ShimanoAltusShifterCap_Printable: has different flat top good for printing (recommended) ShimanoAltusShifterCap_Accurate: has curved top face but it's hard to print…
P
Printables
shimano altus fc-MT101 triple chainset chain guard
chain guard for shimano altus fc-mt101 front crank sprocket. best done in petg, but should be ok in pla.
P
Printables
Shimano Altus shifter extension
After I upgraded my breaks to the current deore generation, I couldn't reach my shifting levers due to the changed clamp position. This extension extends the lever by about 18mm. Installation is a bit fiddly, but once in place, it should…
