ZOHD Altus Walksnail Avatar GT2 nose cone
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ZOHD ALTUS nose cone adapted for the Walksnail Avatar GT2.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 226
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
ZOHD ALTUS nose cone adapted for the Walksnail Avatar GT2.
I have added a cut-out for easier access to the SD card. The camera has a small amount of tilt adjustment, and I have also added locking screws for the antennas, allowing their extension to be adjusted as well.
To install the GT2 kit, you will need:
VTX: 4 × M2 × 4–5 mm screws
Camera: 4 × M2 × 5 mm screws
Antennas: 2 × M2.5 × 5 mm screws (these holes must be threaded/tapped)
This nose cone is specifically designed to accommodate the Walksnail Avatar GT2 system. Mounted to the front plate using 2x M2,5 OEM bolts.