ZOHD Altus Walksnail Avatar GT2 nose cone
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ZOHD ALTUS nose cone adapted for the Walksnail Avatar GT2.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 33
- Makes
- 0
- Views
- 229
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
ZOHD ALTUS nose cone adapted for the Walksnail Avatar GT2.
I have added a cut-out for easier access to the SD card. The camera has a small amount of tilt adjustment, and I have also added locking screws for the antennas, allowing their extension to be adjusted as well.
To install the GT2 kit, you will need:
VTX: 4 × M2 × 4–5 mm screws
Camera: 4 × M2 × 5 mm screws
Antennas: 2 × M2.5 × 5 mm screws (these holes must be threaded/tapped)
This nose cone is specifically designed to accommodate the Walksnail Avatar GT2 system. Mounted to the front plate using 2x M2,5 OEM bolts.