Ms. Pac-Man 3D Logo
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ms. Pac-Man 3D Logo
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 76
- Makes
- 0
- Views
- 915
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
My sister loves Ms. Pac-Man so I made her a 3D printed logo.
This print is made up of multiple parts to show depth and different textures. Each STL file is labeled by color. I also included STL files labeled Face Down or Face Up depending on the print surface you are using.
I printed the Yellow STL and the Pink STL face down on a texture powder coated sheet. Be careful with the yellow STL, the dash between Pac-Man is small, it can get knocked off the print surface if it isn't cleaned properly. I printed the Pink Detail STL on a smooth sheet for best adhesion. Add some glue when assembling.
Share a picture if you print one!