1 / 10
Ocarina Of Time Stand With Triforce + Music For Ocarina — image 1
1 / 10

Ocarina Of Time Stand With Triforce + Music For Ocarina

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I thought the original stand was a little bland, so I added a triforce to zelda-it-up.

Rating
5 / 5
Likes
123
Downloads
420
Makes
1
Views
3,141
Reviews
1

Updated at source:

Model information

Category
Music
License
Creative Commons — Attribution — Noncommercial — Share Alike

I made the Ocarina Of Time by: Zuza awhile ago and it came with a stand, but I didn't print it right away because I wasn't sure if I would get into playing it. I started playing it quite a bit and thought it was time to print the stand. I thought it was a little bland, so I added a triforce to zelda-it-up.

I printed it without supports and it did fine, but if your printer is really bad at bridging I would recommend putting supports in the triforce part.

I did a bit of post-processing. Here are the steps of what I did:

  1. I first painted the triforce with golden paint. I did about 5 layers to get the black not showing through.
  2. After that I let the paint dry for a day, then I sanded it down till it was really smooth.
  3. Last but not least, I sprayed it with Rustoleum 2x gloss clear. I did about 3 passes around the hole thing, but I think 2 will work fine.

 

Print Settings:

Resolution :0.2SupportsNO
Infill :20%Brim:YES
Material:PLAFilament Color:Black

 

 

     More designs

 

Dust-Be-Gone The Best TPU Air DusterMK4/MK4S Z Axis Dust CoverXbox 360 Controller Wheel

Tags