MTD Canopy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a canopy for MTD. Unfortunately I lost one during a flight, so I made this one. It's obviously a bit heavier,…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 237
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
This is a canopy for MTD. Unfortunately I lost one during a flight, so I made this one. It's obviously a bit heavier, but still acceptable.
Print Settings
Printer:
AM8 BLV
Rafts:
No
Yes
Resolution:
0.1375
around 5%
Notes:
I used:
6 top solid layers
3 bottom solid layers
1 perimeter shell
The canopy is placed flat on your printing bed, in the same position as it's installed on the plane.
You can glue the clip with CA.
It's hard to have a nice top layer finish with such little infill. YMMV.
I printed at 150mm/s and 40% solid infill underspeed.
Category: R/C Vehicles