A Box for a 2.1 amplifier board
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a box for a 2.1 Channel Bluetooth 5.0 Subwoofer 200W Amplifier Board 50WX2+100W Power Audio Stereo Amplifier Board
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 78
- Makes
- 0
- Views
- 593
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A casing for a amplifier board bought on aliexpress.
The board: https://www.aliexpress.com/item/1005006221857312.html
An image reference of the product is added to the images if the board is no longer sold.
Note, one of the images of the printed box shows the L - output has the wrong + and - signs. This is fixed in the final model.
Hardware (I used all machine screws)
M3x16mm screws to mount the main body to the bottom.
M3x5-8mm screws to mount the top depending on if you chose the slim version or not.
M3x6mm countersink screws to mount the stand-offs
Print settings:
Use standard profile
The main body is printed with support.
The amplifier board gave me a very good first impression. The included shroud is a too open for my taste. So then I made this.
I use my amplifier board with a 12V 6500mAh PSU.
The speakers I tested this on are Proson Reality 5 LTD 100W 6 ohm and the sub are the one from Corsair SP2200 where I ripped out the electronics.
If you appreciate this model, consider to buy me a coffee at https://buymeacoffee.com/ionnight