Portable hinged battery case for CR123A / 16340
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compact, one-handed operation storage box for 4 CR123A batteries with an integrated hinge.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 83
- Makes
- 3
- Views
- 406
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print-in-Place Hinged Box for 4x CR123A Batteries
Compact, one-handed operation storage box for 4 CR123A batteries (or CR123 or RCR123A or 16340) with an integrated hinge. Optimized for one handed use.
Materials needed:
2 x magnets (size 3 x 2.5 mm - those sold as 3x3 are usually this size), should press fit with a firm push (fusion 360 file provided where you can change magnet size slightly if needed) or just glue them otherwise.
Recommended Print Settings:
Nozzle: confirmed working with 0.4 and 0.25 nozzles (i have uploaded different files i have actually printed and have come out working smoothly)
the v 1.1 files have: holes for pushing the magnet back out with a pin, more material around the magnets
Layer Height: Smaller is better but works with 0.15
make sure seams don't interfere with hinge operation. use painted on seams in your slicer if necessary
Material: PLA or PETG
No brim needed
Recommended post-processing:
sanding of the bottom edges / deburring with deburring tool/knife - or avoid by using elephant foot compensation