hydraulic hand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
its a hand with hydralik tech
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 0
- Views
- 125
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
for this print you need the finger pieces and the conection pieces 4 times, every other piece once. For the hydraulic tech to work you need a hose with the diameter of ten milimeters and a syringe/pump were the hose fits on the opening. the stuff to pump through the hose you need motor oil ore hydraulic oil. To assamble the hand you put the pin trough the hole on the edges of the pins you put the connection pieces on the side , you do this to all 4 fingers than you run the hoses trough the hole on top of the finger than you put the hose trough the hand piece to the hose connection piece. at the single hole of the connection piece you put the syringe/pump and fill it with the oil.