1 / 3
Rose truing stand width extender (parametric)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extenders for the ROSE 2-Zent:A-XL Truing Stand, allows fitting of 157mm hubs and truing of 29ers with the tire on.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 220
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Extenders for the ROSE 2-Zent:A-XL Truing Stand.
With a couple of these you can
- Fit a 157mm hub on the stand (even wider if you change the model parameters form FreeCAD)
- Work on a 29" wheel without having to remove the tire
- Not use anymore the threaded rod thanks to the snap-on design for the hub adapters
Both width and height of the model can be adjusted from the FreeCAD design, there are two holes that match the ones on the stand and can fit a M5 nut on the external side (same thread as the gopro adapters screws).
I've printed it in PLA at 0.25 lh, 15% infill and minimal supports (tree slim), laying it on the side