Shadow Ninja Warrior Figurine
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Shadow Ninja Warrior Figurine
- Rating
- 4.714 / 5
- Likes
- 684
- Downloads
- 3,064
- Makes
- 9
- Views
- 8,798
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Shadow Ninja Warrior Figurine
I added a modifier in 3MF file on its back leg that provides 100% infill in that area (if you using other slicer than Babmbu you need to add it by yourself if it not works) The model was a bit front-heavy, so I had to balance it out. However, even without this modification, it stands on its own on a hard and level surface.
Printed with Fuzzy Skin effect.
Fuzzy Skin: Contour
Fuzzy Skin Point Distance: 0.4
Fuzzy Skin thickness: 0.2
If you're interested in the commercial use of my models, check the link to my Patreon https://patreon.com/29flo
All my photos are real and show an actual 3D-printed figure photographed by me.
Read.me
The key to printing my figurines is having good adhesion to the build plate. I use CryoGrip Pro Frostbite for printing, which provides excellent grip, ensuring that every figurine prints successfully every time. I mainly use filaments from Bambu and have no issues with them either. If you have a different setup, make sure to focus on build plate adhesion, use high-quality dry filament, and everything should be fine.