Book Mark (Musical #1)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.31 – €0.38 net (excluding VAT)
For file: both_0.6n_0.2mm_PLA_MK4IS_16m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.34 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 15.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A book mark using glued on magnets.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 14
- Makes
- 0
- Views
- 63
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a musical themed bookmark.
I found the pictures online and converted them to SVG files.
The cutout part of each side is so you can easily get it open.
It uses a filament hinge. Cut a piece of the filament you printed with that is just slightly shorter than the hinge.
It requires magnets. Neodymium are way too strong, so I went with the thin fridge magnets that you get with advertising on them. They usually are just barely strong enough to hold the advertising thing on the fridge (and can't even hold a note paper to the fridge). But they are thin enough and strong enough for this purpose - especially when cutting it into 2 pieces that will stick to each other. For this project I found some that are 0.5mm thick and just strong enough. I used super glue to attach them. Hint: let the magnets attach to each other the way they attract best, then glue them in place.