FrSky TWIN Antenna Mount for SAB Kraken 580
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Antenna mount for FrSky TWIN antennas mounted to the back of the full-size, low-profile elevator servo of SAB Kraken 580
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 89
- Makes
- 0
- Views
- 335
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an antenna mount for a pair FrSky TWIN antennas. It is designed to be mounted on the back of the elevator servo (low-profile, full-size, not mini) of a SAB Kraken 580. The sleeve portion of the dipole antenna snaps in place and can later be remove by pushing them out through the 1.6mm holes from below.
Mount with your favorite double-sided tape, for example 3M VHB tape.
This mount can easily be modified to match different helicopters. Note: The antenna is intentionally off-center to fit the Kraken 580.
It comes in three versions with different angles of the antenna with respect to horizontal: 22.5deg, 30deg, and 45deg.
Print instructions:
- Print flat (see images)
- Most materials should work, I used PETG
- Around 0.2mm layer height (I used 0.16mm)
- 0.4mm nozzle
- 3 walls
- 25% gyroid infill
- No brim, no supports.