FFBeast direct drive encoder mount.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My version for FFBeast direct drive wheel encoder mount. If you are using bike spoke method and AMT10E3 encoder.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 49
- Makes
- 0
- Views
- 826
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
My version for FFBeast direct drive wheel encoder mount. If you are using bike spoke method and AMT10E3 encoder.
Encoder mount connects to sk16 block leaving 3mm gap for phase wires. Mount has 2mm hole in the middle for centering the spoke. After printing there might be some adjusting needed for that hole. Spoke has to move freely but without slack.
I used M3 bolts and screwed them straight in. Holes will be bit undersize anyway after printing
PLA will be good enough for the purpose. Print flat side down, no supports needed.