Rode NTH100 Left and Right Ear Outer Lock V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Another part that can break/crumble on the Rode NTH100 headphones. You need to retain and reuse the original insert nut
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 29
- Makes
- 0
- Views
- 207
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
When the locks fall apart (and they will), print these out (Left and right are different) Both are included in the file. Then use a soldering iron to heat set the original inserts into these printed replacements. There is a correct orientation for the insert. There are ridges that need to go into the PLA and you will see them in the model and the insert. It's pretty self-explanatory. These are dimensionally perfect if printed in normal PLA on a calibrated printer with a .04 nozzle at a .012 layer height. I suggest that you use PLA. Don't go with PETG or other as dimensionality cannot be guaranteed. I printed them in plain old PLA and they are plenty tough and way tougher than the original.