Rode NTH100 Left and Right Ear Outer Lock V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another part that can break/crumble on the Rode NTH100 headphones. You need to retain and reuse the original insert nut
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 207
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When the locks fall apart (and they will), print these out (Left and right are different) Both are included in the file. Then use a soldering iron to heat set the original inserts into these printed replacements. There is a correct orientation for the insert. There are ridges that need to go into the PLA and you will see them in the model and the insert. It's pretty self-explanatory. These are dimensionally perfect if printed in normal PLA on a calibrated printer with a .04 nozzle at a .012 layer height. I suggest that you use PLA. Don't go with PETG or other as dimensionality cannot be guaranteed. I printed them in plain old PLA and they are plenty tough and way tougher than the original.