1 / 1
1.75" Magnetic Exhaust Pipe Mockup System With Center Lines
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Undated version with 4 center lines to help indicate the clocking position of the pieces. Also added more bends!
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 117
- Makes
- 0
- Views
- 519
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I added 4 center lines to help indicate the clocking position from one piece to the next, all the lines are 90deg apart. The lines are just a small feature and these will still work with the original version without issue.
I also added more options for the degree of sweep, there are now 10deg, 22.5deg, 30deg, and 45deg for each of the different radii (except for 10deg with 1.5" radii because the magnets would hit).
Feel free to reach out if you need additional options or specific parts!