1 / 5
Self Watering Planter with Fuzzy Rocks
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modifications on an awesome little hex planter to print with fuzzy skin texture on the rocks!
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 25
- Makes
- 0
- Views
- 204
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
Printer: Ender 3 v3 SE
Layer height: 0.2mm
Material: PLA
Decided to do the initial layer height 0.32mm for better adhesion after a couple failed attempts.
Modifying this awesome design has been a blast! Trying to print it with fuzzy skin successfully - not so much. I highly suggest using the .3mf file made in OrcaSlicer included as a template. If you don't, here are some pointers:
- Whatever settings you change, make sure there is no floating fuzzy skin in the sliced model. OrcaSlicer decided that some of the fuzzy parts don't need any support and I missed those in the preview. So they started printing mid air… Make overhangs printable/print angle are the key settings that helped me fix that.
- Make Anything's multi texture print tutorial really helped with setting up the project correctly. Only thing that should be changed in my opinion is the infill pattern, I swapped lightning with adaptive cubic 5% density.
- Fuzzy skin settings that worked for me.
- If you want to paint it afterwards like me, use a sponge or a roller, a brush wasn't the smartest idea.
- My .3mf file has the original pot scaled to x→180% y→180% z→140% because I needed a bigger boy, scaling both to 100% will get the original dimensions.
Good luck and post your makes!