1 / 5
Self Watering Planter with Fuzzy Rocks
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modifications on an awesome little hex planter to print with fuzzy skin texture on the rocks!
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 204
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (16)Powiązane
Printer: Ender 3 v3 SE
Layer height: 0.2mm
Material: PLA
Decided to do the initial layer height 0.32mm for better adhesion after a couple failed attempts.
Modifying this awesome design has been a blast! Trying to print it with fuzzy skin successfully - not so much. I highly suggest using the .3mf file made in OrcaSlicer included as a template. If you don't, here are some pointers:
- Whatever settings you change, make sure there is no floating fuzzy skin in the sliced model. OrcaSlicer decided that some of the fuzzy parts don't need any support and I missed those in the preview. So they started printing mid air… Make overhangs printable/print angle are the key settings that helped me fix that.
- Make Anything's multi texture print tutorial really helped with setting up the project correctly. Only thing that should be changed in my opinion is the infill pattern, I swapped lightning with adaptive cubic 5% density.
- Fuzzy skin settings that worked for me.
- If you want to paint it afterwards like me, use a sponge or a roller, a brush wasn't the smartest idea.
- My .3mf file has the original pot scaled to x→180% y→180% z→140% because I needed a bigger boy, scaling both to 100% will get the original dimensions.
Good luck and post your makes!