1 / 6
Adapter to take 3.3 volts from the expansion port (WiFi-Port) of the Prusa Buddy Board
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Do you need a 3.3 V voltage source to power any components?
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 25
- Makes
- 1
- Views
- 619
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
Print the adapter. Remove 2 pins from a pcb header connector and solder two wires to it. One for ground (GND) and one for voltage (VCC). Insert the wires into the holes on the top of the adapter. GND and VCC are marked on the sides of the adapter. Cut the pins at the output of the adapter. You now have 3.3V at your disposal.
Although I have used this adapter myself, I disclaim any responsibility for any damage caused to the board.