1 / 7
Trak Racer TRX - Seat Fan
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A multi model design that will push air through the default rear vents of the the Trak Racer TRX seat to keep you cool!
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 31
- Makes
- 1
- Views
- 444
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print settings
- 15% infill
- 0.2mm SPEED
- Hatchbox PLA
- standard MK4 input shaping profile
- supports active everywhere with support blockers included in .3mf file.
Printables (at settings above)
- 0000015_12_TRX_FrontPlateDriver 1hr18m, 19.25g
- 0000015_12_TRX_FrontPlatePassenger 1hr18m, 19.25g
- 0000015_12_TRX_RearPlateDriver 5hr44m, 161g
- 0000015_12_TRX_RearPlatePassenger 5hr44m, 161g
- 0000016_02_TRX_FanMountBottom 14h38m, 446g
Bill of materials
- 4x M3x20 (fasten 0000015_12_TRX_FrontPlate to 0000015_12_TRX_RearPlate)
- 4x M3 heatserts (go into 0000015_12_TRX_FrontPlate)
- 2x M8x20 (fasten 0000016_02_TRX_FanMountBottom to Trak Racer TRX seat mount)
- 2x M8 washer (fasten 0000016_02_TRX_FanMountBottom to Trak Racer TRX seat mount)
- 2x M8 nut (fasten 0000016_02_TRX_FanMountBottom to Trak Racer TRX seat mount)
- 1x M4x10 (fasten 0000016_02_TRX_FanMountBottom to fan)
- 1x 120x38mm pc fan, we used this
- 25 inches of this 2.5 inch tubing, we used this
- 4x zip ties (fasten tubing)
Note - seat has to be mounted quite high vertically and midway horizontally for this to fit, see photos