ESP Thread Border Router Case (Ethernet)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case for the Espressif Thread Border Router with attached LAN module.
- Rating
- 4.8 / 5
- Likes
- 31
- Downloads
- 394
- Makes
- 6
- Views
- 1,492
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
A case for the ESP Thread Border Router with attached Ethernet daugther board. The Border Router is developed by Espressif and consits of an ESP32-S3 and ESP32-H2 SoC. It can serve as a Thread Border Router using the Openthread Border Router implementation. This case supports the Ethernet daugther board by Espressif.
- Hardware description: https://docs.espressif.com/projects/esp-thread-br/en/latest/hardware_platforms.html#ethernet-based-thread-border-router
- Openthread: https://openthread.io/guides/border-router/espressif-esp32
The case is hold together by four screws. I used threaded inserts for the screws. You can modify the attached step-file if you do not want to use inserts or different screw diameters. I used the following material:
- 4x M2 x 12 screws
- 4x Rutex M2 x 4 threaded inserts
On the back, there are holes for wall mounting by M4 screws. I printed in PLA with 0.2 mm layer heigth and three perimeters.