1 / 3
Parts Washer Pump to Nozzle Adapter for Jebao PP-399N — image 1
1 / 3

Parts Washer Pump to Nozzle Adapter for Jebao PP-399N

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is an adapter for the Jebao PP-399N parts washer pump. This is sold as the Buffalo Tools PWP20 20Gal Parts Washer…

Rating
0 / 5
Likes
2
Downloads
15
Makes
0
Views
81
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial — Share Alike

This is an adapter for the Jebao PP-399N parts washer pump. This is sold as the Buffalo Tools PWP20 20Gal Parts Washer Pump and was the pump used in two different 3.5 Gallon parts washers that I have. If you buy the replacement pump it does not come with the adapter to connect the pump to the nozzle. I tried to duplicate the original part that came with my parts washer, but increased the thickness where the threads are for strength.

I haven't had this on my parts washer very long but so far it seems to work well. I'm new to 3D printing. I printed with 100% infill (for strength) and .12 layer height to get the threads to come out nice but I'm not sure if that was necessary. I also added manual supports for the ledge where the large gasket goes. I did this manually because I didn't want the supports to interfere with the threads.

The replacement pump came with an o-ring, but I've included STL files for the bottom and top gaskets. I printed the top/smaller gasket from TPU and it seems to work fine.

Print Settings

Printer Brand:

FlashForge

Printer:

Adventurer 5M Pro

**Supports:**

Yes

Resolution:

.12

**Infill:**

100%

Category: 3D Printing

Tags