1 / 3
Parts Washer Pump to Nozzle Adapter for Jebao PP-399N — zdjęcie 1
1 / 3

Parts Washer Pump to Nozzle Adapter for Jebao PP-399N

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is an adapter for the Jebao PP-399N parts washer pump. This is sold as the Buffalo Tools PWP20 20Gal Parts Washer…

Ocena
0 / 5
Polubienia
2
Pobrania
15
Wydruki
0
Wyświetlenia
81
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is an adapter for the Jebao PP-399N parts washer pump. This is sold as the Buffalo Tools PWP20 20Gal Parts Washer Pump and was the pump used in two different 3.5 Gallon parts washers that I have. If you buy the replacement pump it does not come with the adapter to connect the pump to the nozzle. I tried to duplicate the original part that came with my parts washer, but increased the thickness where the threads are for strength.

I haven't had this on my parts washer very long but so far it seems to work well. I'm new to 3D printing. I printed with 100% infill (for strength) and .12 layer height to get the threads to come out nice but I'm not sure if that was necessary. I also added manual supports for the ledge where the large gasket goes. I did this manually because I didn't want the supports to interfere with the threads.

The replacement pump came with an o-ring, but I've included STL files for the bottom and top gaskets. I printed the top/smaller gasket from TPU and it seems to work fine.

Print Settings

Printer Brand:

FlashForge

Printer:

Adventurer 5M Pro

**Supports:**

Yes

Resolution:

.12

**Infill:**

100%

Category: 3D Printing

Tagi