Thrustmaster Joystick Grip Adapter (20mm square tube) - FFBeast
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter for Thrustmaster Grip to 20mm square tube. Option for FFBeast or similar with cheap extension.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 51
- Makes
- 0
- Views
- 501
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Means to create a Thrustmaster/Similar joystick extension with cheap 20mm square tube.
Prints in two halves to allow addition of 5 pin mini din cable (pictured) to pass through before adding to the tube. Holes on the sides can be tapped for screws (or the tube itself can be).
I specifically designed this for an FFBeast joystick. Due to the high forces you will need a strong 3D print, I have tried PLA+ (sheared off after a few days use), ABS (shattered after a few months in a violent stick movement). Finally had printed in SLM Stainless Steel by JLC3dp (like a rock now).
Should be fine with a filament print on less powerful force feedback joysticks or traditional spring based sticks, or with stick power dialed down.
I have included both straight on and 15 degree offset parts.