1 / 3
Minitrix 15184: 5 and 4 axes bogies wheel fixation plate replacement — image 1
1 / 3

Minitrix 15184: 5 and 4 axes bogies wheel fixation plate replacement

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

1:1 replacement of this known to break metal part

Rating
0 / 5
Likes
0
Downloads
34
Makes
0
Views
227
Reviews
0

Updated at source:

Model information

Category
Vehicles
License
Creative Commons — Attribution — Noncommercial

Those wheel fixation plates for the bogies are known to break (three of them on my sons wagon broke in multiple parts). To fix it, I designed this replacements to be 3D printed.

I printed them in PETG (Prusament), using a 0.4mm nozzle and 0.15mm layer height. Make sure to have a good layer adhesion (I lowered the print speed). Also be careful when removing it from the print bed.

Please leave a comment or a make photo if this model was of use!

Version 2

4 and 5 axis versions.

Needs to be printed with supports (automatic, overhang threshold 40°, from build plate only), but prints in one piece (no need to assemble). Just carefully remove the supports.

The 5 axes part is not symmetric, the block side need to go into the coupling slot.

Version 1

5 axis version only.

Prints without supports.

You need to assemble (glue) the main part (Fahrgestellboden5A) and the little block (Kupplungsblock) as of the attached photo. May require some post processing. I don't know if everything is correctly working without this block mounted (not tested).

The part is not symmetric (also without the block mounted), the block side need to go into the coupling slot as of the attached photo.

 

Tags