1 / 3
Minitrix 15184: 5 and 4 axes bogies wheel fixation plate replacement — zdjęcie 1
1 / 3

Minitrix 15184: 5 and 4 axes bogies wheel fixation plate replacement

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

1:1 replacement of this known to break metal part

Ocena
0 / 5
Polubienia
0
Pobrania
34
Wydruki
0
Wyświetlenia
222
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial

Those wheel fixation plates for the bogies are known to break (three of them on my sons wagon broke in multiple parts). To fix it, I designed this replacements to be 3D printed.

I printed them in PETG (Prusament), using a 0.4mm nozzle and 0.15mm layer height. Make sure to have a good layer adhesion (I lowered the print speed). Also be careful when removing it from the print bed.

Please leave a comment or a make photo if this model was of use!

Version 2

4 and 5 axis versions.

Needs to be printed with supports (automatic, overhang threshold 40°, from build plate only), but prints in one piece (no need to assemble). Just carefully remove the supports.

The 5 axes part is not symmetric, the block side need to go into the coupling slot.

Version 1

5 axis version only.

Prints without supports.

You need to assemble (glue) the main part (Fahrgestellboden5A) and the little block (Kupplungsblock) as of the attached photo. May require some post processing. I don't know if everything is correctly working without this block mounted (not tested).

The part is not symmetric (also without the block mounted), the block side need to go into the coupling slot as of the attached photo.

 

Tagi