1 / 3
Small Microphone Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a microphone case for small microphones like clip-on-mic or old laptop mic that you want to recycle.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 93
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Share Alike
I created this model to put an old microphone that I removed from an old, broken laptop. You can adjust it for different size microphones, inner diameter is 10 mm so if you have a different size mic, you can change size in slicer. Don't forget to change cap size too, and don't forget to put your cable thought cap before soldering :D
Recommended Settings
- 0.4 mm nozzle
- 0.2 mm layer height
Notes
- I used marble PLA with 0.8 mm nozzle for printing this model.
- It doesn't need to be detailed, so higher nozzle size and layer height will reduce print time.