A300 mag tube extension
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A300 mag tube extension
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 21
- Makes
- 0
- Views
- 146
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution
This is a mag tube extension for the Beretta A300; it adds one 2¾ shell capacity. You will need a new spring for this to work properly. I made mine out of ABS, and it's held up really well. You'll need to remove the plastic spring cap inside the metal mag tube. The threads should be a little tight but not so tight that you can't do it by hand. If you're having issues, try scaling it accordingly or increasing your print resolution. I tried to match the stock look as much as possible and think I did a pretty good job.
I also included a step file in case you want modify it. you could pretty easily stretch this design to make it hold more.