A300 mag tube extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A300 mag tube extension
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
This is a mag tube extension for the Beretta A300; it adds one 2¾ shell capacity. You will need a new spring for this to work properly. I made mine out of ABS, and it's held up really well. You'll need to remove the plastic spring cap inside the metal mag tube. The threads should be a little tight but not so tight that you can't do it by hand. If you're having issues, try scaling it accordingly or increasing your print resolution. I tried to match the stock look as much as possible and think I did a pretty good job.
I also included a step file in case you want modify it. you could pretty easily stretch this design to make it hold more.