1 / 2
MK6-MegaGearSolid/Virtigo!! ("NEW")
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print with 4 walls 25% 3D Honeycomb, Gyroid infill etc etc.. 3 top and bottom shell. Similar, if not the same, build instructions as the MK6.
Take a part 1 POM wheel then put the two bearings in the slots in the motor plate, then the motor you will need a metal spacer from the Creality Hotend and will place it between the bearing and the gears, lastly you will put nuts in the gears and screw through the bearing on the other side, I will take more pictures when I can!
Print with SUPPORTS for the gears and motorplate
(BIG GEAR AND MOTOR GEAR do not need supports)