Counting matching models…
The build print the necessary parts press fit the Y axis aluminum spar in to “base 2.0” run wires thru the center of the spar screw in a m3-16 bolt in to the base flush against the wires screw 4 m3-20 screws in to the base in holes after…
The Recreator3D.com –MK6 : FUN SIZE - a KB-3D.com Build Kit Experience - Turning PET1 Bottles into Filament! BUY A KIT HERE!!! 🚀 KB-3D's Impact on the MK6 Kits Since 3DPrintopia 2024 , KB-3D has helped take the Recreator3D MK6 from a DIY…
I made the Dual motor mount for recreator 3d fun size stronger. You need to print another gear like the original one. It can be used with one or two motors.
top cover with fan mount for my recreator mk6 anycubic vyper version just covers the hole in the top and adds a cooling fan to the mainboard
adapter to use the spooler with mk5 recreator
The Recreator3D community cutter works well for cutting PET bottles for pultrusion recycling, but normally needs labor-intensive disassembly and reassembly to swap out the top part for different cutting depths, making it difficult to…
Print 2 spacers as the tensioner will slide the filament off the spool
i printed in abs to avoid deformation. the file is in 3mf to open in prusa slicer, in order to import negative shapes.
Remixed a version of the large gear of the recreator machine. The difference is that I removed the words along the outside but kept the recycle symbol to simplify the design, use less material, and reduce print time
For the rest of the MK6 Files go to This Link and download all the files you are going to use + this file and start printing if you have any issues feel free to comment with an image that represents your issue and I will try my best to…
Spacer for MK6 Ender 3 PSU to make the mainboard fit with the chunky Ender 3 PSU because the original model was modeled after the skinny Ender 3 PSU. Some side notes you have to download all other parts from the link above this model uses…
About this mod This mod is designed to be an accessory to other recycling equipment such as an ARTME3D, Filament re-extruder, Injection molding machine or other plastic recycling machines that require re-ground plastic. It uses the same…
I got lots of binding on the original gears for the Mk6 recreator, even without a strip in the machine. So I thought a set of herringbone gears would help keep them from rubbing on each other and binding up. They are based on the stock…
The build print the necessary parts press fit the Y axis aluminum spar in to “base 2.0” run wires thru the center of the spar screw in a m3-16 bolt in to the base flush against the wires screw 4 m3-20 screws in to the base in holes after…
The original cooling fan wasn't strong enough, so I made this stronger version. Printed parts: holder 1x cover 1x spacer 4x Other parts: 24V* 40x40mm cooling fan 1x M3 bolt 4x M5 bolt 2x M5 T nut 2x *You can also use a fan with a…
Here’s an updated description for your Recreator3D wood version motherboard cover : This is a custom motherboard cover for the Recreator3D, designed specifically for the wood version with a 155mm width. This cover ensures your motherboard…
I made this to streamline the aesthetics I was looking for
This remix adds a plate to the left of the hotend on a Recreator3d MK6 Fun Size, replacing the mini spooler. This plate is designed to be used with the V3 Community Bottle Cutter and has the appropriate matching M3 mounting holes, as well…
After printing and assembling Dustin's design I discovered that between my print settings and the thickness of the bottles I was trying to cut the plastic strip was forcing the bearings apart rather than being cut by them. I added a rib…
update : I have included a pdf in the files to show assembly with renders to help make building this a bit more smooth. Some parts may have changed since I started putting this together. All uploaded parts are the most recent. Recreator…
A spacer for the hexagonal hole in the reduction gear that mounts on the wheel bearing. The hexagonal walls are too large to capture the hexagonal locknut, but the standard Ender M5x30mm bolt can be inserted in the well. This spacer makes…
Motivation The Recreator3D MK5 build assumes you have an Ender3 V1. In my case the donor printer was V2, so many things had to be adjusted for the V2 parts, including the fan shroud. The fan cover STEP file taken from Creality GitHub was…
The switch that I had was too large for the original model by PackratArt , so I expanded its cutout a bit and moved to the side.
The Recreator3D.com –MK6 : FUN SIZE - a KB-3D.com Build Kit Experience - Turning PET1 Bottles into Filament! BUY A KIT HERE!!! 🚀 KB-3D's Impact on the MK6 Kits Since 3DPrintopia 2024 , KB-3D has helped take the Recreator3D MK6 from a DIY…
Parts to replace the Recreator Mk5 circuit board cover section. This allows easier access to the board while testing electronics. This change incidentally makes the parts easier to print.
This is a mod for the Recreator3D MK6 that turns it into an Automatic Material System (AMS) which is able to automatically feed new filament into your printer when the filament you started the print with runs out. Purpose: When making…
English Description: This upgrade kit is an extension of the original Recreator 3D system and is specifically designed to utilize the stock components of the Ender 3 V3 SE. The original design was intended only for the classic Ender 3, so…
Revised version of the 8mm bottle cutter for the mk6 fun size re-creator PET machine
Video Commercial: Join Our Groups to Stay Up To Date! FACEBOOK: http://facebook.com/groups/recreator3D DISCORD: https://discord.gg/vn2CH72bMq The Recreator 3D's purpose is to Recreate PET#1 recyclable plastic bottles into useable 3D…
Have you found that you accidentally printed ANOTHER Recreator3D MK6 “funsize” base unit? Well, now you can use it to strip your bottles down while you're pultruding on the other! Q: Which bottle cutter are you using? A: The bottle cutter…
This is a mount that holds all but one of the different-sized Cutters for one of the community bottle cutters. The Quick Swap Bottle Cutter that these mounts are for was designed by @DustinRange_1202017
!!! Attention !!! This project is still being produced. Please be careful of any possible damage. --- Print Setting 3 walls 20% 3D Honeycomb. The outer gear should not use brim. Aggressive elephant foot compensation is OK. All part not…
anycubic vyper adapter kit for recreator use the mainoard plate for a guide for drilling holes for mounting i made mine with the psu housing, i took the top plate off and drilled holes in it to attach to some of the extrusions from the…
allows you to put a monoprice select mini v2 hotend in place of a ender 3 one
This is the Recreator3D Filament Dryer made from Ender3 parts. It is based around the standard Ender3 235mm x 235mm heated bed. I have verified that it is compatible with the original Ender 3, Ender 3 Pro, and Ender 3 V2. It should work…
I've add some circle shape to controlling the air. Uploaded: Freecad FCStd file and .step and .stl
Another try for better newcooling. Controlled air, from other direction. Uploaded: Freecad FCStd file and .step and .stl
I really liked the swappable cutter guides but I needed a way to keep them organized. I left a few empty spots so i can make the missing sizes or a couple spares
Recreator3D.com – Turning PET1 Bottles into Filament with Repurposed 3D Printers We’re not just recycling—we’re recreating . At Recreator3D.com , we’re transforming PET1 plastic bottles into high-quality 3D printing filament using…
The Official Recreator3D Mascot... Captain Recreator! Created by the Amazing, Wekster! https://www.patreon.com/wekster https://www.thingiverse.com/wekster/designs FACEBOOK: http://facebook.com/groups/recreator3D DISCORD:…
I made the Dual motor mount for recreator 3d fun size stronger. You need to print another gear like the original one. It can be used with one or two motors.
top cover with fan mount for my recreator mk6 anycubic vyper version just covers the hole in the top and adds a cooling fan to the mainboard
adapter to use the spooler with mk5 recreator
Recreator3D.com – Turning PET1 Bottles into Filament with Repurposed 3D Printers We’re not just recycling—we’re recreating . At Recreator3D.com , we’re transforming PET1 plastic bottles into high-quality 3D printing filament using…
The Recreator 3D - Colorizer! Easily add color to your converted plastic bottle 3D Filament created with the Recreator 3D. Order 2 Sets of the following 16 Pieces Mini Permanent Markers for Nurses Badge, 8 Assorted Colors Mini Markers…
The Recreator3D PET1 Spooler Connector, uses 2x - M3x4 (or taller) screws. Reduces a rough start to your pull. - Connect one side to a draw string (we used some PET1 Filament) and connect it to the spooler. You'll want to use two of the…
Print four of the feet mounts and screw it into a board or shelf to safely mount it to the wall, but if you lift, is still removable for maintenance.
You must print the model and use 2 screws and T-nuts to mount it. Once it is mounted, you have to glue the power switch to it using hot glue or other types of adhesive.
This model is a remix of the original base plate from JRT3D 's " The Recreator 3D : MK6 " I have modified the original base plate to have compatible mounting points for a cheap 24v power supply I found on amazon , the “ Daokai 24V…
Recreator3D.com – Turning PET1 Bottles into Filament with Repurposed 3D Printers We’re not just recycling—we’re recreating . At Recreator3D.com , we’re transforming PET1 plastic bottles into high-quality 3D printing filament using…
The Recreator3D.com Community Bottle Dryer Prints on a 200x200 Bed Uses a 40MM Fan for Air Circulation To Power the Fan, Use a 5 Volt Fan and Wire it into a 5 Volt Power Cord for a Phone Charger or equivalent. Just make sure to use a…
Fully 3d printable bobble head version of Captain Recreator. The body can be printed with no support, but the head does need support. You will also need the spring from @3dPrinty's project here:…
The Recreator 3D PET1 Key Chain 3D Filament created from Soda Bottles. A great way to promote The Recreator 3D as well to have an awesome talking point Recreator3D.com
I made All the measures at once ! I only tested 6mm 9mm 10mm 11mm If you test other measures please give feedback!
The Recreator3D.com - Mini Spooler, Holder and Enclosure.
The Recreator 3D - Calibration Cube, nothing fancy or amazing! Just something fun to print your PET1 Filament.
STOP!!! If you don't choose to participate in what is considered a BETA print. Follow this link to known working files. https://www.printables.com/model/179820-the-recreator-3d-mk5kit-ender3-diy-3d-printer-fila BELOW …is the BETA Step…
MKX-MK5 Recreator bowden guide & "bladeless" fan mod
Aide insert plastique bouteille Hotend MK5 The recreator Permet de charger le plastique de la bouteille dans le HOTend du MK5 plus rapidement.
I wanted to be able to print the recreator 3D JRT3D on my Prusa Mini+, so i split the parts I couldn't print. The bottle cutter is remixed to fit with european bearings and 2 cent's. the other parts are just covers and signs for a clean…
- IF YOU JUST BOUGHT a PARTS KIT from KB-3D.com → please go to the following download page for the MK6 : Fun Size KB-3D Build Kit : https://www.printables.com/model/1246713-the-recreator-3d-mk6-fun-size-a-kb-3dcom-build-kit If you are…
I always used JRT3D minispools for the recreator and the new bottle cutter from Ricardo Pereira open up a world of possibilities. Unfortunately there were no mini spool for wider stripes or longer filaments so I remixed one and resized…
drill bit has an 8mm “insert” since the torque is relevant, use a 3d infill (recommended gyroid 40%) and 4-5 perimeters, PETG or ASA/ABS are recommended.
Remix of the Community bottle cutter for people living in Europe. It needs two 10 cents coins (two 2 cents coin works fine too) instead of two Pennies. These are for the wider version of the cutter (the new one). With these files to print…
This is a remix of the Community Cutter for The Recreator 3D and PPU3D. This is the “Bottle Cutter Top - 8mm” and uses UK 1 Pence pieces in place of the US cent/dime that is used in the original model. According to The Royal Mint, the One…
This model can be printed without supports.
This model can be printed without supports.
ENGLISH: Setting up a bearing system on the large wheel : Materials required: 2x 608ZZ bearings 1x threaded rod 8mm diameter, 152mm long This system is added to the original system, avoids waste. 1. Print the bearing holder part in 2…
ENGLISH: Modification of the filament guiding system: - Modification of the system bar by a plain steel bar of 8mm instead of 10mm. - Modification of the support feet of the bar, 8mm hole instead of 10mm - Modification of the guide to…
ENGLISH: Changes in ventilation: - Change of fan for a 40x40x10 Silencer (12v) - Addition of a LM2596 step-down device (model below). - Housing for LM2596 hooked on the side of the aluminum profile FRANCAIS: Modifications de la…
My Ender 3 lead screw nut was different from the nut shown in the video. So i made this adapter. There is a version for M3 brass inserts and one you can use without. You can use nut's original screws. This adapter needs to be glued in…
This is my own version of the Recreator3D Vertigo machine bt JRT3D. This remix is based on the few images and short clips you can find online. My version is intended as a work in progress project. This means that I will continue to update…
Belt Cleaner Required material: - 1 Screw M3x20 - 1 Nut M3 or 1 Insert M3 (depending on the model chosen). - 8 cylindrical magnets 4x2mm 2 pieces of sponge: - 51x21x25 for the bottom - 51x21x8 for the top I use sponges designed for…
I remixes some file to use my old geeetech A10M parts
With the original dual motor plate my steppers was skipping, now problem is solved
This is a remix of Part 5B for the Recreator3D MK5 series of PET Pulltruders. This now uses a 608 bearing in place of the POM wheel. If you wish to remix this to use a different size bearing or for any other reason feel free to find this…
This is a variant of the cutter guide with a sponge that allows you to clean the cut strip from dust and residues. Cut a piece of a sponge so that it fits into its slot and then make a cut along the pass line. The guide is removable from…
I couldnt get the gear off the stepper motor and didn't want to damage the gear so i modified the small gear to press fit onto the original gear on the stepper motor. Its a 11 mm hole. I printed it in PLA+ and has been holding up!
Laser cut out of 1/8in or 3mm plywood or acrylic and glue together. you can add or subtract inner pieces for different width pet strips.
I really struggled to get the original design with bearings working reliably, so I did this remix using 18mm snap blades, which I have hundreds of. The blade will cut about 10 bottles before you need to snap that section and go to the…
Printed with .28 layer height, front facing down with supports.
Simple spacer to make tight mount of Prusament spool on Recreator 3D spool core.
I remixed the model to accept larger 608 bearings, as they were easier for me to grind flat with their larger size.
I haven't an ender 3 and her POM wheels, but some 608zz bearing (use for skateboard). I also modify the offset for keep the originals dual gear with M5 nut. For information, I reduced the width of the spooler back by 2 mm, for save a…
I needed this model for install my board BTT SKR v1.3. I think the mount is the same for the another boards SKR, but I havent check it.
I needed this model for install my LCD Reprap full graphic. I also added a button for the reset switch and modifyed the original model fixation hole for don't see the screw.
This remix adds a plate to the left of the hotend on a Recreator 3d MK6 Funsize, replacing the mini spooler. This plate is designed to be used with the included bottle cutter and has the appropriate matching M4 mounting holes, however…
I made this simple 3 in 1 tool to : Guide : when the position of the PET strip is stable, the result is less of default and you can speed up, Wash : the 2 first chambers is for to put a piece of spongle. The passage wash slowly the strip.…
This design remixes the original faceplate for the MK6 Funsize to suit the fysetc AIO II mainboard and LCD (https://www.aliexpress.com/item/1005004728567711.html?spm=a2g0o.order_list.order_list_main.39.766b1802RyVIiB). I have also…
Création d'un carter afin de protéger les engrenages du MK5 et éviter les coincements de filament.
The Recreator3D.com Community Bottle Dryer V2 is made for smaller build volumes . No longer limited to size! Very interchangeable and easy to alter for your varying bottle sizes . Easy to put together. Some strong glue is suggested to…
Introducing PrintABlok compatible side panels for your Recreator3D MK6 “FunSize” pulltruder. Now you can bask in the glory, knowing you will be able to build additional storage onto your funsize for your tools such as tweezers to aid in…
Just made this simple part to hide the wire of this huge machine. I provide STL, if you need other tell me, i will do my best To print like other parts of the machine You can adjust by yourself the length regarding the printer you have…
Following a problem during an extrusion of a big thickness of pet (Spanish blue Pet bottle) the double pinion began to not turn round. I check drawing and the result is the bearing inside wheel got a 8mm Ø and the drawing 9+ so i…
This is a Right Side Case LCD modification for a Creality CR-6 touchsceen
This is an adapter for the E3 V2 switch for the Recreator 3D.
Due to having to change the right case to fit the shorter wires, a mirrored bracket made the model look better.
The switch wires are shorter on the E3V2 so I modified the original housing to comfortably work, as long as you use the switch adapter that I also remixed.
You can use the existing caps that are part of the original. PVC pipe specs: 135mm long 3/4 schedule 40 They should press into the pipe. I recommend securing these adapters to the PVC pipe with superglue. I have added an optional bushing…
