1 / 11
Mini-Mitsubishi magnetic robot arm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a small toy robot arm held together by magnets.I used 1,75mm x 10mm magnets glued at each joint.the robot is…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 48
- Makes
- 0
- Views
- 502
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a small toy robot arm held together by magnets. I used 1,75mm x 10mm magnets glued at each joint.
the robot is heavily inspired by the Mitsubishi melfa assista robot arm. the robots scale is 1:10 of its Mitsubishi counterpart.
I recommend to inspect thoroughly after slicing to ensure that all magnet holes are present and supported. skip support on the small details on the rest of the model to get the best result.
Category: Robotics