1 / 4
One Policy Agent (OPA) Logo Magnet
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A magnet of the One Policy Agent (OPA) Logo
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 25
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution
This is the logo for the project One Policy Agent (OPA) an open-source policy engine, as a magnet! The magnets are embedded in the print for a smooth finish. Also added an optional back with a QR code that links to the github project.
- MMU required for the colors: 4 colors without QR, 5 colors with the QR code.
- Uses 8 magnets, each 8x3mm
- Add pause at layer 14 to add the magnets, I added a dot of super glue in each hole
- Recommend printing it face down, I used a textured print sheet which I thought gave it a nice look.
To print with the QR code, replace the file called bottom with the files qr_bottom, qr_inner, and qr_outer.
I printed it using a .6mm nozzle at .3mm layer height. Enabling ironing for the QR code is possible but it adds more time and isn't necessary.